Led Board TX RX

There is a tiny board provided with the case for mounting on the front panel. The parts required are .

  1. led with 3 pins. 2 anode on left and right and center is cathode.
  2. Resistors between 1k to 10k use as per per intensity of light required,
  3. Relimate connector 2 pin
  4. L type pins

Schematic Of Led board.

This is my earlier led board, the new one is included

in the kit.

TX And RX wires for LED soldered on ubitx TXRX relay.


Post Author: suniladmin


Leave a Reply

Your email address will not be published.