Led Board TX RX

There is a tiny board provided with the case for mounting on the front panel. The parts required are . led with 3 pins. 2 anode on left and right and center is cathode. Resistors between 1k to 10k use as per per intensity of light required, Relimate connector 2 pin L type pins Schematic […]

First uBitx

These pictures are of my first ubitx which was constructed without the front panel board, The analogue and digital wires are soldered directly on the stereo sockets. This method can also be used if you do not wish to use the front panel board. This method is only for experienced builders. During that time I […]